This 2007 GMC Yukon came in with multiple complaints among which were the engine seemed to have no power, the Service Engine Soon, ABS and Traction lights were on and there was a stability message displayed in the Driver’s Information Center (DIC). The customer also stated that the vehicle ran fine sometimes but as soon as the … Continue reading “2007 GMC Yukon Multiple Misfires-Codes-P0300-P0352-P0354-P0356-P0358”
This 2008 GMC Yukon came in with the complaint of reduced power and the vehicle could not be driven over about 35 mph. There were a lot of codes stored but the only one of real relevance was Code P0641 Symptom 00, 5 volt reference circuit 1. I looked at data under the TAC section … Continue reading “2008 GMC Yukon, Reduced Power Mode, Code P0641 00 Stored”
This 2000 Chevrolet Suburban came in with the complaint that the instrument cluster does not work. I checked communication with my Tech 2 scan tool and found a communication problem with most modules. Including the instrument cluster. Since my scan tool would power up, I knew that I had power to the DCL and at … Continue reading “2000 Chevrolet Suburban, Instrument Cluster Does Not Work”
This 2003 Chevrolet Tahoe with a 5.3 liter engine came in with the customer complaint of the reduced power display was on and the vehicle could not be driven more than about 30 mph. Checking codes found a code p1516 stored for Predicted VS. Actual Throttle Position Correlation Error. That is fancy computer talk for … Continue reading “Reduced Power Displayed 2003 Chevrolet Tahoe”