This 2007 GMC Yukon came in with multiple complaints among which were the engine seemed to have no power, the Service Engine Soon, ABS and Traction lights were on and there was a stability message displayed in the Driver’s Information Center (DIC). The customer also stated that the vehicle ran fine sometimes but as soon as the … Continue reading “2007 GMC Yukon Multiple Misfires-Codes-P0300-P0352-P0354-P0356-P0358”
This 2005 GMC Sierra came in with a poor run condition and multiple misfire codes stored. Code P0304 was one of the misfire codes stored. While looking at data I noted that misfires on cylinder #4 were markedly higher that most of the other cylinders. Normally when confronted with high misfire counts on this engine … Continue reading “2005 GMC Sierra, Multiple Misfires”
Vehicle came in the shop, with the SES light on and an obvious misfire. Previous shops had replaced plugs and wires, removed cats, replaced both bank 2 oxygen sensors, the ECM and had swapped positions of coils and injectors for cylinder #6. I scanned vehicle and found a misfire present on #6 cylinder on a … Continue reading “2004 Chevrolet Silverado 2500HD , 6.0 Vin U Misfire”