This 2005 Kia Sorento came in with the simple problem that the right hand stoplight was not working. Not much to it but many have stated that I need to remember that what is second nature to me can be daunting to someone that has never changed a light bulb before. With that in mind … Continue reading “2005 Kia Sorento, Changing A Stop Light Bulb”
This 2002 Oldsmobile Bravada came in with the complaint the that driver’s side tail light was not working. A little disassembly and the problem was quite evident. Water intrusion had damaged the harness connector and the socket circuit board assembly. In the following picture you can see that the terminal on then far right side … Continue reading “2002 Oldsmobile Bravada, Tail Lights Inop”
1995 Chevrolet Monte Carlo changing the turn signal switch due to inop stoplights. To view diagnostics for this repair please click here. The first step is to disable and remove the air bag assembly according to manufacturers guidelines. If you do not have a manual you can purchase from either Mitchell or AllData. There are … Continue reading “1995 Chevrolet Monte Carlo, Changing The Turn Signal Switch”
This 1995 Chevrolet Monte Carlo came in with the complain that the brake / stop lights do not work. As long as all of the bulbs are working this is easy to test. First confirm that the stop lights in fact do not work. Then check the turn signals and hazard lights. If they work … Continue reading “1995 Chevrolet Monte Carlo, No Brake Lights”
This 2002 GMC Yukon came in with the complaint that the lights on the rear of the truck were working sometimes and sometimes not. The customer had only complained about the turn signals but in testing I found that different lights on both sides were not working properly. I figured it had to be a … Continue reading “2002 GMC Yukon, Tail , Stop, Turn and Reverse Lights Inop”
This 2000 Ford Mustang came in with the complaint that the shifter interlock for the automatic transmission would not release properly and that it would have to be tried several times before it would release. I checked it and found that it required the brake pedal to be firmly pushed in order for it to … Continue reading “2000 Ford Mustang, Shifter Interlock Erratic, Inop”
This 1988 Chevrolet C1500 pickup came in with the complaint that the stoplights or brake lights do not work. The customer had already replaced the stoplight switch, bulbs and fuse. Why he replaced all of that and did not bother checking anything I do not know?? I did check the fuse and it was okay. … Continue reading “1988 Chevrolet C1500 Pickup No Brake, Stop Lights”
This 2003 Chevrolet Trailblazer came in with the complaint that the right stoplight does not work with the tail / park lights on. After removing the assembly by opening the rear hatch, removing the two retaining screws and sliding the assembly out of the vehicle, I had to work very hard to unplug the harness … Continue reading “2003 Chevrolet Trailblazer Stoplight Inop”
This 2000 GMC Yukon came in with the complaint that at different times the stop lights, tail lights, turn signals and back up lights stop working. I did the basis bulb and socket tests and found nothing wrong. When I got to looking a little deeper in the system I found this rear harness junction … Continue reading “2000 GMC Yukon, Rear Lights Inop”
This 2004 Cadillac CTS came in with the complaint of no stoplights. I decided to start by checking the bulbs. To do this I first had to remove the black plastic nuts that also serve as hooks for the cargo net. After the nuts were removed I pulled the trim panel up that goes across … Continue reading “2004 Cadillac CTS No Stoplights”